TRUE RESULT Blood Glucose Test Strips

TRUE result Blood Glucose Test Strips are used only with the TRUE result Family of Meters to quantitatively measure whole blood glucose. TRUE result Test Strips may be used for self-testing at home or for professional use.

Quality Control Testing

There are 2 quality control tests to let you know that the System is working properly.

- Automatic Self-Test

An automatic self-test is performed each time a TRUE result Test Strip is inserted into a Meter from the TRUE result Family. Upon inserting a Test Strip into the Test Port, if all segments appear and the Drop Symbol appears in the Display, the Meter is working properly and may be used for testing.

- Control Test

TRUE result GDH-PQQ Control Solution is used to check testing technique and System performance. When Control Test result falls within Control Test range printed on Test Strip vial label of Test Strips being used, System is working properly and testing technique is good. See Owner’s Booklet or TRUE result GDH-PQQ Control Solution Instructions for Use for more information on Control Testing.

Important Information

There are 3 levels of TRUE result GDH-PQQ Control Solution available which contain known amounts of glucose. It is important to perform Control Tests with more than one level of Control Solution to ensure your System is working properly and your testing technique is good. For more information on obtaining different levels of Control Solution. contact for assistance.

Blood Glucose Testing

Note to Healthcare Professionals: Venous whole blood collected into EDTA or heparin blood collection tubes may be used for testing. Mix tube well before sampling.

1. Allow Meter and Test Strips to sit at room temperature for 30 minutes. If opening vial for the first time, white date opened on vial label.

2. Check written date and printed date on Test Strip vial label. Discard vial and unused Test Strips if either 4 months after opening or date printed next to ⏳ on vial label has passed, whichever comes first. Test with new vial.

3. Wash hands (and forearm for alternate site testing). Rinse well and dry thoroughly.

4. Remove one Test Strip from vial. Recap vial right away.

5. Insert Contact End of Test Strip into Test Port of Meter. Meter turns on. Do not remove Test Strip from Meter until testing is finished.

6. Obtain blood drop.

7. After Drop Symbol appears in Display, with Test Strip still in Meter, touch Test Strip Sample Tip to the top of the blood drop and allow blood to be drawn into Test Strip. Remove Test Strip Sample Tip from sample drop immediately after the Meter begins testing.

8. Result is displayed. Record result.

9. Remove Test Strip from Meter. Meter turns off. Discard used Test Strip and lancet in appropriate container.

☣Treat used Test Strips and lancets as a biological risk. Dispose used Test Strips and lancets in approved container.

Test Principle: The TRUE result Test Strip is a plastic strip containing chemicals and electrodes. When inserted into a Meter from the TRUE result Family, glucose is measured using amperometric technology employing a glucose dehydrogenase-PQQ reaction. When whole blood or Control Solution is drawn into the Sample Tip of the Test Strip, glucose in the sample reacts with the chemicals and produces an electrical current. The Meter measures the current and calculates the amount of glucose. The result is displayed as a plasma value.